ماژول RFID با قابلیت خواندن نوشتن فرکانس 13.56MHZ ورژن V5 Ultralight

Specification

  • Highly integrated analog circuitry to demodulate and decode responses
  • Supports ISO/IEC14443A/MIFARE
  • Typical operating distance in Reader/Writer mode for communication to a ISO/IEC14443A / MIFARE is 40~50 mm
  • Supports MIFARE Classic encryption in Reader/Writer mode
  • Supports ISO/IEC14443A higher transfer speed communication up to 848kbit/s
  • Control by Serial UART interface: Baud rate could be 2400bps ~ 115200bps, with default baud rate 9600bps
  • With the chip ISO14443, it supports MIFARE standard encryption algorithm
  • Configuration data is preserved in EEPROM against power cut off
  • Built-in 8K EEPROM, easy to access it by sending commands
  • Easy to use, by sending simple commands users can control it to read or write cards
  • In compact command, command is as short as one byte
  • Excellent EMC performance
  • ROSH: Lead-free
  • Parameter
  • Power Supply: 4.5V~5.5V, typically 5V.
  • Interface: UART (5V TTL) and SPI (3.3V TTL)
  • Size: 40mm x 50mm
  • Usage
  • Baud rate could be 2400bps ~ 115200bps
  • Baud Rate: 9600bps
  • Parity bit: None
  • Start bit: 1
  • Data bit: 8
  • Stop bit: 1
تماس بگیرید
نقد و بررسی اجمالی

Introduction

We embeded an MCU on this module. By sending command via UART interface, you can make it work. Operation is very easy. Most work is done by the embededMCU. There is also a SPI interface on the board. This is the MFRC’s SPI. You can access MFRC directly via this inteface.There are two kinds of command: Basic command and compact command. All the command are in Hex format. Please download manual for more information. Connecting with Arduino is pretty easy. With Arduino Sensor Shield, just plug in and play.

 

نمایش ادامه مطلب
نظرات کاربران

لطفا پیش از ارسال نظر، خلاصه قوانین زیر را مطالعه کنید: فارسی بنویسید و از کیبورد فارسی استفاده کنید. بهتر است از فضای خالی (Space) بیش‌از‌حدِ معمول، شکلک یا ایموجی استفاده نکنید و از کشیدن حروف یا کلمات با صفحه‌کلید بپرهیزید. نظرات خود را براساس تجربه و استفاده‌ی عملی و با دقت به نکات فنی ارسال کنید؛ بدون تعصب به محصول خاص، مزایا و معایب را بازگو کنید و بهتر است از ارسال نظرات چندکلمه‌‌ای خودداری کنید. بهتر است در نظرات خود از تمرکز روی عناصر متغیر مثل قیمت، پرهیز کنید. به کاربران و سایر اشخاص احترام بگذارید. پیام‌هایی که شامل محتوای توهین‌آمیز و کلمات نامناسب باشند، حذف می‌شوند.

اولین کسی باشید که دیدگاهی می نویسد “ماژول RFID با قابلیت خواندن نوشتن فرکانس 13.56MHZ ورژن V5 Ultralight”

نقد و بررسی‌ها0

  • جدیدترین
  • مفیدترین
  • دیدگاه خریداران

هیچ دیدگاهی برای این محصول نوشته نشده است.

پرسش و پاسخ

هیچ پرسشی یافت نشد

    برای ثبت پرسش، لازم است ابتدا وارد حساب کاربری خود شوید

    نقد و بررسی