ماژول آمپلی فایر صوتی بلوتوث دار 10W/15W/20W مدل XY-AP15H

Introduction

XY-AP15H is a high-power Stereo Bluetooth Audio module. Dual channels audio signal output. Built-in amplifier module therefore it can connect to loudspeaker directly. It is ideal for DIY wireless Bluetooth speakers and transponders. It can work with APP Sinilink which can display can monitor the current voice source and switch Equalizer. Use the power amplifier board as far away as possible from the WIFI signal (router) . The recommended supply voltage is DC 8~24V, if it exceeds 26V, the chip will burn. The power supply does not exceed 12V when connected to a 4ￎﾩ speaker and does not exceed 24V when connected to an 8ￎﾩ speaker
The power supply current is recommended to be above 2A.
The working power of the module exceeds 20W*2, and a heat sink is required
The speaker cable should not be too long and ensure that it is suitable within 1 meter
Pay attention to static electricity protection. Discharge the static electricity on your hands before touching the power amplifier board to prevent static electricity from breaking down the chip. Bluetooth chips are more sensitive to static electricity.
It is recommended to adapt the speaker with a rated power of 30W and above to avoid the speaker from heating and burning