ماژول شتاب سنج CJMCU LIS3DSH با دقت بالا

Introduction

LIS3DSH CJMCU is built-in 2 finite state machine three axis high resolution accelerometer module
This link module uses the ST original chip model: LIS3DSH
LIS3DSH is a super low power high performance three axis linear acceleration of the “nano” embedded state machine family, can be programmed to achieve independent application.
The LIS3DSH has a dynamically selectable + 2G / + 4G / + 6G / + 16 g full scale, which is capable of measuring the output data rate of acceleration from 3.125Hz to 1.6KHz.
Self checking function allows the user to check the function of the sensor in the final application.
The device can be configured to generate an interrupt signal that is activated by a user defined movement pattern.
The LIS3DSH has an integrated first, first out (FIFO) buffer that allows the user to store data to reduce the host processor’s intervention.
LIS3DSH is packaged in a small thin plastic grid array (LGA), which guarantees working at the extended temperature range from -40 C to +85
main features
Wide supply voltage: 1.71 V to 3.6 V
Independent IO power supply (1.8V) and power supply voltage compatible
Ultra low power consumption of +/- 4g / +/-6g / +/-8g / +/-2g / +/-16g dynamic optional full scale
IIC / SPI digital output interface
16 bit data output
Programmable embedded state machine
Embedded temperature sensor
Embedded self test
Embedded advanced first in, first out
10000g high impact resistance