تراشه مبدل آنالوگ به دیجیتال ADS1230

Specification

  • Resolution (Bits): 20
  • Number of input channels: 1
  • Sample rate (Max) (kSPS): 0.08
  • Interface type: SPI
  • Architecture: Delta-Sigma
  • Input type: Differential, Single-Ended
  • Multi-channel configuration: —
  • Reference mode: Ext
  • Input range (Max): 0.039(V)
  • Input range (Min): 0(V)
  • Features: 50/60 Hz Rejection, Oscillator, PGA
  • Operating temperature range: -40(C) to 85(C)
  • Power consumption (Typ): 2.9(mW)
  • Analog voltage AVDD (Min): 2.7(V)
  • Analog voltage AVDD (Max): 5.3(V)
  • Digital supply (Min): 2.7(V)
  • Digital supply (Max): 5.3(V)
تماس بگیرید
نقد و بررسی اجمالی

Introduction

The ADS1230 is a precision 20-bit analog-to-digital converter (ADC). With an onboard low-noise programmable gain amplifier (PGA), onboard oscillator, and precision 20-bit delta-sigma ADC, the ADS1230 provides a complete front-end solution for bridge sensor applications including weigh scales, strain gauges, and pressure sensors.

The low-noise PGA has a gain of 64 or 128, supporting a full-scale differential input of ±39mV or ±19.5mV, respectively. The delta-sigma ADC has 20-bit effective resolution and is comprised of a 3rd-order modulator and 4th-order digital filter. Two data rates are supported: 10SPS (with both 50Hz and 60Hz rejection) and 80SPS. The ADS1230 can be clocked by the internal oscillator or an external clock source. Offset calibration is performed on-demand, and the ADS1230 can be put in a low-power standby mode or shut off completely in power-down mode.

All of the features of the ADS1230 are controlled by dedicated pins; there are no digital registers to program. Data are output over an easily-isolated serial interface that connects directly to the MSP430 and other microcontrollers.

The ADS1230 is available in a TSSOP-16 package and is specified from -40°C to +85°C.

 

نمایش ادامه مطلب
نظرات کاربران

لطفا پیش از ارسال نظر، خلاصه قوانین زیر را مطالعه کنید: فارسی بنویسید و از کیبورد فارسی استفاده کنید. بهتر است از فضای خالی (Space) بیش‌از‌حدِ معمول، شکلک یا ایموجی استفاده نکنید و از کشیدن حروف یا کلمات با صفحه‌کلید بپرهیزید. نظرات خود را براساس تجربه و استفاده‌ی عملی و با دقت به نکات فنی ارسال کنید؛ بدون تعصب به محصول خاص، مزایا و معایب را بازگو کنید و بهتر است از ارسال نظرات چندکلمه‌‌ای خودداری کنید. بهتر است در نظرات خود از تمرکز روی عناصر متغیر مثل قیمت، پرهیز کنید. به کاربران و سایر اشخاص احترام بگذارید. پیام‌هایی که شامل محتوای توهین‌آمیز و کلمات نامناسب باشند، حذف می‌شوند.

اولین کسی باشید که دیدگاهی می نویسد “تراشه مبدل آنالوگ به دیجیتال ADS1230”

نقد و بررسی‌ها0

  • جدیدترین
  • مفیدترین
  • دیدگاه خریداران

هیچ دیدگاهی برای این محصول نوشته نشده است.

پرسش و پاسخ

هیچ پرسشی یافت نشد

    برای ثبت پرسش، لازم است ابتدا وارد حساب کاربری خود شوید

    نقد و بررسی